First Day                         Purchase PristineBlue Pool Products

• Start with a clean pool.
• KNOW THE POOL’S VOLUME.  Almost all “problem” arise from the fact that pool owners don’t know the proper gallonage of their pool.  Click here for our pool dimensions chart.

• Make sure the water is in balance.  Water balance in a Pristine Blue® pool is a little different than in most pools.  Maintain these Pristine Blue® levels for the best in product effectiveness and efficiency.  The levels you need to attain are:
  pH - 7.2 to 7.6
  Total Alkalinity – 30 to 90 ppm (this is the most important difference)
  Calcium Hardness – 175 to 275 ppm
  BioGuard Water Balancers such as Balance Pak 100, 200 & 300, Lo ‘n Slo, and Optimizer Plus are 100% compatible with Pristine Blue®.

• DO NOT CONTINUE UNTIL THE WATER IS BALANCED!
• Shock the Pool with Pristine Extra to eliminate bio-waste in the pool water

• Add 2 oz. Pristine Check per 1,000 gallons of water and allow to circulate for at least 4 to 6 hours (preferably overnight).
• Run the filter continuously.

Second Day

• Backwash filter or clean the cartridge(s).
• Add 2 oz. Pristine Blue per 1,000 gallons water.

For information on Converting a Biguanide (Baquacil®, Soft Swim®, Revacil®, etc) Pool to Pristine Blue, click here

Important Note:  DO NOT ADD ANY PRISTINE BLUE FOR THE NEXT 2 (TWO) WEEKS.  MAINTAIN pH 7.2 TO 7.6.  After 2 weeks, check Pristine Blue level and top-up as needed.

Spring Pool opening or a freshly filled pool.

First Day                           Purchase PristineBlue Pool Products

• Start with a clean pool.  Be sure all leaves & winter debris are removed & pool has been vacuumed.
• KNOW THE POOL’S VOLUME.  Almost all “problem” arise from the fact that pool owners don’t know the proper gallonage of their pool.  Click here for our pool dimensions chart.

• Make sure the water is in balance.  Water balance in a Pristine Blue pool is a little different than in most pools.  Maintain these Pristine Blue levels for the best in product effectiveness and efficiency.  The levels you need to attain are:
  pH - 7.2 to 7.6
  Total Alkalinity – 30 to 90 ppm (this is the most important difference)
  Calcium Hardness – 175 to 275 ppm
  BioGuard Water Balancers such as Balance Pak 100, 200 & 300, Lo ‘n Slo, and Optimizer Plus are 100% compatible with Pristine Blue.

• DO NOT CONTINUE UNTIL THE WATER IS BALANCED!
• Shock the Pool with Pristine Extra to eliminate bio-waste in the pool water
• Add 2 oz. Pristine Check per 1,000 gallons of water and allow to circulate for at least 4 to 6 hours (preferably overnight).
• Shock the pool daily with a chlorine shock such as Easy Shock & Swim or Burn Out® Extreme until the water is clear & clean.
• ONLY PROCEED TO SECOND DAY WHEN THE POOL IS CLEAR & CLEAN.

Second Day

• Backwash filter or clean the cartridge(s).
• Top up the Pristine Blue level following the accompanying chart.
• Add 2 oz. Pristine Blue per 1,000 gallons water as an initial dosage (prior Pristine Blue usage).

Important Note:  DO NOT ADD ANY PRISTINE BLUE FOR THE NEXT 2 (TWO) WEEKS.  MAINTAIN pH 7.2 TO 7.6.  After 2 weeks, check Pristine Blue level and top-up as needed.

ALL POOLS:
Remove All Leaves & Debris from Cover before Removing Cover
Bring Water Level up to Normal operating level
Vacuum pool of all dirt & debris
Clean Liner with Off the Wall or Surface Cleaner
Clean Filter with Kleen It or Strip Kwik Filter Cleaner
Clean ladder treads and Winter Cover with Stow Away® Cover Cleaner
Allow opening chemicals to circulate for 24 - 36 hours
Let water Filter 1 day before bringing in Opening water sample for
Testing & Analysis
Adjust pH, Total Alkalinity & Calcium Hardness as needed

Continue with regular Pristine Blue Maintenance.

Click here for additional PristineBlue information (a new window will open)

If you still need help, here's how to reach us:

Telephone (during store hours): Stratford  203-377-0100
                                             
FAX: (24 hrs) 203-375-7787
Email: techhelp@parpool-spa.com

Baquacil® is a registered trademark of Arch Chemicals, Inc.
Revacil® is a registered trademark of Mareva France