|

 |
Jack's Magic®
Solution One™, Iron, Cobalt & Spot Etching Stuff™
Jack's Magic® Solution One™,
Iron, Cobalt & Spot Etching Stuff™
aids in removing iron, cobalt & etched stains on all pool surfaces.
Jack's Magic® Solution One™,
Iron, Cobalt & Spot Etching Stuff™
is used after proper identification using the Stain ID kit. Follow all
directions below for optimal results.
Please note that stains & staining may just be a
symptom of a more complex problem. We recommend that you read the
following information on
Stains &
Staining and
water balance
prior to treating your problem.
Special Product Note: The effectiveness of several Jack’s Magic products - The Stain ID Kit®, Stain Solution #1®, Stain Solution #2®, and Stain Solution #3® - can be affected when the pool water temperature is below 65° F (approx. 18° C). The further below 65° F, the temperature is, the less likely any of these products will be effective. Therefore, in addition to properly balanced water, always make sure the water temperature is at least 65° F degrees.
Use 2 lb. per 12,000 gallons.
2 lb. Bottle List $64.99
Our Web Price $62.99
Please see precautionary statement below. |
| Our Customers Also
Bought... |

Optimizer Plus |

Shock Treatments |

Water Balance |

Cleaners |

Soft Swim |

Mineral Springs |
 |
|
Directions for Iron, Cobalt & Spot Etching:
- Use Jack's Magic Stain ID kit to properly identify the stain you are attempting to treat.
- Turn Pool Pump ON & chlorinator (if equipped) OFF
- Lower chlorine level to just below 1.0 ppm (use Jack's Magic After Shock or
BioGuard Chem Out if needed)
- Add 1 Qt of Jack's Magic Blue Stuff or Pink Stuff per 10,000 gallons of pool water (pools utilizing a salt generator or with high TDS - over 1500 ppm - should use Purple Stuff)
- To enhance your filter's ability during the stain removal process, use
BioGuard Sparkle Up
- Broadcast 2 lb. Solution #1, Iron, Cobalt & Spot Etching Stuff per 12,000 gallons over the stained area.
- Circulate pool for 48 hours continuously until the stains are removed.
- Clean filter with
BioGuard Kleen It.
- Slowly re-chlorinate & rebalance the pool water.
- Do NOT shock the pool for at least one week following this treatment.
- Add Jack's Magic Blue Stuff or Pink Stuff on a monthly basis as a preventative basis
|