Par Pool & Spa - Certified Stain Specialists™

Jack's Magic® Solution Two™ Copper & Scale Stuff™ aids

Jack's Magic® Solution Two™ Copper & Scale Stuff™ aids also helps remove stains & scale caused by metals in older pools.

Please note that stains & staining may just be a symptom of a more complex problem.  We recommend that you read the following information on Stains & Staining and water balance prior to treating your problem.

Only use Solution Two if the heater (if installed) can be bypassed during treatment.  If the heater cannot be bypassed, do not use this product - use Jack's Magic Blue Stuff instead.  DO NOT Shock the pool during the course or treatment with this product. For best results, it is advisable not to use the pool during treatment of Copper & Scale Stuff.

Special Product Note: The effectiveness of several Jack’s Magic products - The Stain ID Kit®, Stain Solution #1®, Stain Solution #2®, and Stain Solution #3® - can be affected when the pool water temperature is below 65° F (approx. 18° C).  The further below 65° F, the temperature is, the less likely any of these products will be effective. Therefore, in addition to properly balanced water, always make sure the water temperature is at least 65° F degrees.

FOLLOW ALL LABEL INSTRUCTIONS.

Please see precautionary statement below.