SpaBoss Cal Rise calcium hardness increaser, discount spa chemicals, Spa & Hot tub Chemicals

SpaBoss® Spa & Hot tub Chemicals Spa & Hot Tub Water Balancing Products

SpaBoss® Cal Rise

SpaBoss Cal Rise calcium hardness increaser

SpaBoss® Cal Rise

SpaBoss Cal Rise is a granular, easy to use product that raises Calcium Hardness in spas & hot tubs. Low calcium hardness leads to foaming or sudsing of the water and highly corrosive spa & hot tub water which eventually damages spa surfaces & equipment.

For more information about spa water balance, click here.

CAN BE USED WITH ANY HOT WATER TREATMENT SYSTEM.

Dosage/Application:
Read & follow all label instructions. Adjust pH to 7.2--7.6; Calcium Hardness in spas should be 150 - 200 ppm in MOST spa care systems. Add 1/2 CAPFUL per 500 gallons of water with pump running broadcasting over the water's surface. Retest spa water after about 3 hours. Do not pre-dissolve.

Hint: NEVER test your spa or hot tub water after the high speed jets or air bubbles have run. Bubbles from high speed jets release carbon dioxide into the water causing a false HIGH pH. ALWAYS wait 2 to 3 hours after use or the jets have been turned off for accurate water balancing levels.

Sizes Available: 1.5 lb. Bottle (up to up to 50% more of the amount normally found in other brands of spa & hot tub pH water balancing products) - $8.99 each

Click on the Duck
for Spa, Bath, Aromatherapy & Other
Gift ideas

Our Customers Also Bought...

Spa Garage

Underwater
Disco Light

Spa Steps

Rubber Ducks

SpaScenes Cover Murals

Candles

Off-set Umbrellas

NOTE: Avoid physical contact with product. Follow all safety information on label instructions. Store in a cool, dry place. Keep out of the reach of children.